REMO ROTOTOM - Securing AD10 to Ratchet Block; Rototom Drum Mounting and Adjustment; Mounting Rototom Drums; Pitch Adjustment Method

Tighten AD10 & Rototrac to the Ratchet Block
with the included Dum Key.
Slide the 10” Rototom Assembly into the
Rototrac with the washer on top.
Tighten the Handle to secure the
10” Rototom to the Rototrac. Re-
peat for the 6” & 8” Rototoms,
sliding them into the Rototrac from
the le side of the stand.
Rotate the enre Rototom assembly
Clockwise to increase the pitch.
Rotate the enre Rototom assembly
Counter Clockwise to decrease the pitch.
6” Rototom
8” Rototom
10” Rototom
Tension Rods should be threaded all the way through and even on
the boom casng
For more informaon visit: remo.com