Dual input type (separate input for opening and closing):
Connect Remootio's output #1 to the "open" input terminal of your gate or garage door control
unit and connect Remootio's output #2 to the "close" input terminal of your gate or garage
door control unit. If you have a gate or garage door opener that needs both outputs to be wired
to the control board, please go to the settings menu of Remootio and select "output
configuration" and please choose the "Output 1: output to open | Output 2: output to close"
option.
For more details about the output configuration, please visit this article.
To Next Page
Loading...