Programming Manual
http://www.remotecontrol-express.com - TEL : +44 (0) 207 399 7782 - FAX : +44 (0) 207 927 3151
3. Press the "Validation" button on the receiver, the display shows 00 for the complete opening
function.
4. To access the partial opening function, press the + button, the display shows 01.
5. Press simultaneously the button on the new remote you want to program and the
"Validation" button on the receiver until the display shows two dashes. Release the buttons.
6. On the receiver, press "sortie de menu actif" button
7. Your new remote control is now programmed.
To Previous Page
Loading...