Page 1 of 9
Wireless Z-Wave Control
ZRP-120NA
Z-Wave Repeater
USER MANUAL
Introduction
Thank you for choosing ZRP-120 Z-Wave Repeater product. ZRP-120 is a Z-Wave
repeater with best RF performance to replicate Z-Wave signals in a network. The
repeater re-transmits an input Radio Frequency (RF) signal by routing the signal
around obstacles and radio dead spots to ensure that the signal is received at its
intended destinations.
ZRP-120 is a security enabled Z-Wave plus device. A security Enabled Z-Wave Plus
Controller must be used in order to fully utilize the product.
To Next Page
General