Remtron Command Pro 21T10 User Manual

REMOTE CONTROL AND TELEMETRY SYSTEMS
Read all Safety and Warnings before
installing and operating this system
WARNING !
142108c - CMMDPRO.pm6
Rev C. 7-16-99
REMTRON, INC.
1916 W. Mission Rd., Escondido, CA 92029-1114
PHONE 760-737-7800 FAX 760-737-7810
Radio Remote Control System
User's Manual
This manual covers the following Remtron models:
Transmitters Receivers
21T10 o 21R10 o
21T14 o 21R14 o
21T18 o 21R22 o
21T20 o
21T23 o
21T34 o
21T44 o
AVERTISSEMENT !
Lire toutes les consignes de sécurité
et tous les avertissements avant
de faire fonctionner ce système.

Remtron Command Pro 21T10 Specifications

General

Brand	Remtron
Model	Command Pro 21T10
Category	Remote Control
Language	English

Summary

SECTION 1: SYSTEM DESCRIPTION

1.1 INTRODUCTION

Overview of the Remtron Command Pro Radio Remote Control System for industrial machinery.

1.2 TRANSMITTER DESCRIPTION

Details on the rugged, microprocessor-controlled hand-held, lever, and joystick transmitters.

1.3 RECEIVER DESCRIPTION

Explains the two-subassembly receiver (RF/Decoder and Relay boards) in a NEMA 12 cabinet.

SECTION 2: INSTALLATION

2.1 INSTALLATION PLANNING

Considerations for safe and reliable system operation, including environment and connections.

2.2 MOUNTING LOCATION

Guidelines for selecting the receiver mounting location, considering clearance and vibration.

2.3 ANTENNA MOUNTING

Advice on placing the antenna for optimal performance and using remote mounting kits.

2.4 RECEIVER INSTALLATION

Instructions for inspecting components and verifying received items before installation.

Power/Transfer Switch Wiring

Details on wiring the power and transfer switch for safe operation of the system.

Output Relay Connections

Guidance on connecting output relays, their ratings, and limitations for reliable operation.

Power Connections

Instructions for connecting the receiver's power supply, ensuring correct voltage and polarity.

Installation Testing

Steps for performing system tests before service, including power indicators and voltage checks.

SECTION 3: TROUBLESHOOTING

3.1 GENERAL

Overview of troubleshooting procedures and the use of built-in diagnostic devices.

3.2 TRANSMITTER TESTING

Procedures for testing transmitter functionality, including LED indicators and battery status.

3.3 RECEIVER TESTING

Information on receiver LEDs (Power, Address, Signal) and their diagnostic meanings.

RECEIVER TROUBLESHOOTING

Steps for diagnosing receiver issues, checking indicators, power, and connections.

SECTION 4: MAINTENANCE

4.1 PERIODIC MAINTENANCE

Annual inspection of transmitters and monthly checks of connections for reliability.

4.2 TRANSMITTER & RECEIVER REPAIRS

Guidance for obtaining details on transmitter and receiver repair procedures.

4.3 PROGRAMMING

Explanation of how to program frequency, address codes, and operating parameters.

Identity Code

Details on the six-digit alphanumeric unit identity code, frequency, and address assignments.

4.4 PARTS LISTS

List of available accessories and spare parts for the remote control system.

4.5 ORDERING & REPAIRS

Procedure for ordering products and returning items for repair, including contact information.

4.6 Warranty

Information on warranty periods and terms for Remtron's material handling and remote control products.