operating faults ......................................................(current page)
faults
operating faults ................................................(current page)
3.19
ENG_UD58924_2
Lève-vitres électriques (XJA - Renault)
One-touch electric windows
(continued)
Note: if the window detects resistance
when closing (e.g. by a tree branch
etc.), it stops and then lowers again by
a few centimetres.
Remote control window
closing
When the doors are locked from the
outside, if you double press the lock-
ing button on the driver’s door in
hands-free mode, on the card or, de-
pending on the vehicle, on the key,
all of the windows equipped with a one-
touch electric window will close auto-
matically.
It is recommended that the user only
operates the system when the vehi-
cle can be seen clearly and no one is
inside.
ELECTRIC WINDOWS (2/2)
Manual window winder
controls
Turn handle 7.
7
Operating faults
In case of a fault when closing a
window, the system reverts to normal
mode: pull the switch concerned up as
often as necessary to fully close the
window (the window will close gradu-
ally), hold the switch (still on the clos-
ing side) for one second then lower and
raise the window fully to reinitialise the
system.
If necessary, contact your authorised
dealer.
When closing the windows, ensure that no part of the body (arm, hand,
etc.) is protruding from the vehicle.
Risk of serious injury.
To Next Page
Loading...
Need help?
General
