86A-11
V1
MR-453-X79-86A000$080.mif
RADIO
Anti-theft code
86A
THE DISPLAY SHOWS "CODE" OR "0000"
Entering the security code. The radio beeps every 2 seconds for 2 minutes then displays CODE.
Is the radio code known?
(See anti-theft code recovery
procedure)
Has the 4-digit code been obtained?
The radio displays CODE then 0000
Go back to scrambled mode. With the radio off,
press buttons 2, 5 and ON. Wait approximately
2 minutes until CODE then 0000 appears
Enter the first digit using the buttons on the front panel (press button 1 successively)
Enter the three other digits using the same method (buttons 2, 3 and then 4)
Confirm the security code by pressing and holding button 6 on the front panel.
The radio displays ERROR then CODE
The radio switches to "CONFIGURATION"
mode (if being used for the first time) and
operates normally.
NO
YES
YES
NO
NO
YES
YES
NO
To Next Page
Loading...
