2.38
LANE DEPARTURE WARNING (2/3)
Conditions for non-activation
of alerts
– Indicators activated or having been
activated less than approximately
four seconds prior to departing from
the lane;
– Very fast lane departure;
– Driving continuously on a line;
– On bends, the function allows for
slightly cutting the bend;
– ...
Activation/deactivation
From the multifunction screen 1: select
“Vehicle”, “Driving assistance”, “Lane
departure warning” then choose “ON”
or “OFF”.
With the function activated, the green
visibility indicators 3 for the left and
right lines are displayed on the instru-
ment panel.
1
The function is set to notify the
driver if:
– the vehicle speed is greater than ap-
proximately 45 mph (70 km/h);
and
– lines are detected and the visibility
indicators 3 are green.
The function triggers an alert if a line
is crossed without the direction indica-
tors being activated. The function alerts
the driver through a beep and the indi-
cator the line crossed switches to red
on the instrument panel.
You can access menu “Driving as-
sistance” directly from button 2
.
2
3
To Next Page
Loading...
