FLUENCE Z.E. – Roadside assistance technician's guide
RENAULT PROPERTY Network Development Division | February 2012 V3|
19
e. 400V circuit lockout
Procedure (refer to the Repair Manual for more details)
:
! Wear electrical safety gloves and a face shield .
! Position the "Warning: Danger" signs (see page 25)
! Locate the traction battery cutout switch (see illustration below).
! Remove the traction battery cutout switch and place it on the instrument panel
! Fit the lockout tool in place of the traction battery cutout switch.
! Fit the lockout padlock on the traction battery lockout tool
! Position the "Warning: Danger" signs (see page 26)
! Complete the lockout sheet (see page 27)
Locating the traction battery cutout
switch:
! The traction battery cutout switch is
located behind the vehicle's right
rear wheel.
!
# The traction battery cutout
switch.
" Reminder: this operation must be carried out by a breakdown/recovery
operative qualified to work on electric vehicles
To Next Page
Loading...
