14
LIGHTING/WIPERS
Lighting A
Turn ring 1 on stalk A to:
š
switch on the side lights;
k
switch on the dipped beam headlights;
Headlight flash: pull stalk A towards you;
Main beam headlights: with the engine running
and ring 1 in position
k
, push the stalk A;
AUTO: activate the automatic operation of the head-
lights (depending on the vehicle).
automatic main beam headlights.
Turn ring 2 downwards and then release it to:
g
switch on the front fog lights.
Turn ring 2 upwards and then release it to:
f
switch on the rear fog-lamp.
To switch them off, repeat the operation.
Wipers B
The various positions of stalk B are for:
–
n
: a single sweep of the wipers
– 0: stop;
– AUTO: automatic wiping;
NB: ring 3 can be used to adjust the sensitivity of
automatic wiping, from minimum sensitivity (4) to
maximum sensitivity (6).
– 1: normal wiping speed;
– 2: fast wiping speed.
Rear screen wiper: to start/stop wiping, turn
ring 5 towards you, then release it.
Windscreen washer: pull stalk B.
Rear screen washer: push the stalk B.
BA
1 2
A
B
3 4 5
6