1
4
6
5
3
2
NU701-5_fra_G1.qxd 4/05/04 13:44 Page 1.41
x76 - KANGOO NU 701-5
C:\Documentum\Checkout\NU701_5_T1-ENG.win 21/6/2004 10:12
-page47
1.41
CHILD SAFETY (continued)
Fitting a child seat
• Before installing and using the
seat, carefully read the
instructions provided.
• The front seats must not be moved
back beyond the halfway point on
the seat runners and the seatback
must be in an upright position.
• Position the guides 2 (supplied
with the seat) in the openings
provided in the seat squab.
• Offer up seat catches 3 opposite
the two rings 1 which are fitted to
the vehicle rear centre seats.
• Latch the hooks onto the rings
andmakesureitislockedin
place properly (by moving it
forwards and backwards and from
left to right).
• Push on the base of the seat firmly
to bring it into contact with the
seatback and make sure it is
securely in position.
When the seat is in the rear-facing
position, use strap 4 supplied with
the seat. Insert hook 5 into hole 6.
To Next Page
Loading...
