1.126
ENG_UD71444_2
Caméra arrière permanente (XFK - Renault)
Operation
The camera’s field of vision does not
cover the entire area behind the vehi-
cle, particularly the blind spot area A.
On vehicles equipped with the Stop
and Start function, the display remains
active when the engine is in standby.
➥ 2.8.
Switching off the function
The display switches of:
– at least two minutes after the ignition
is switched off;
– immediately after locking the vehicle.
CAMERA REAR VIEW (2/4)
Objects which appear on the edge of screen 2 may be deformed.
In very bright light (snow, vehicle in sunshine, etc.), the camera view may be par-
tially disturbed.
In low brightness or poor weather, the image on the screen may be distorted.
A
2
Special features related to
the reverse gear
When the reverse gear is engaged, the
camera located on the rear-end door
displays the area to the rear of the ve-
hicle. ➥ 2.111.
Vehicles fitted with a multimedia
screen 3
When the vehicle is reversing, consider
the images transmitted by the rear view
camera (multimedia screen) in addition
to the information available through the
rear view mirror as there remains a rear
view blind spot A ➥ 2.111.
3
To Next Page
Loading...
