tool kit ........................................................
(up to the end of the DU)
hubcap tool ................................................
(up to the end of the DU)
trims ...........................................................
(up to the end of the DU)
tools ...........................................................
(up to the end of the DU)
5.10
ENG_UD65244_1
Enjoliveur - Roue (XFK - Renault)
Central wheel trim with
visible wheel bolts
(Wheel trim 4)
The bolts are directly accessible.
Wheel trim with concealed
wheel bolts
Remove the wheel trim using hubcap
tool 1 (located in the tool kit) by en-
gaging the hook in the opening near
valve 2.
To refit it, align it with valve 2. Push the
retaining hooks in fully, starting with
side A near the valve, followed by B
and C, finishing at D opposite the valve.
Wheel trims - wheel
WHEEL TRIMS - WHEEL
Do not leave the tools un-
secured inside the vehicle
as they may come loose
under braking. After use,
check that all the tools are correctly
clipped into the tool kit, then position
it correctly in its housing.
Risk of injury.
Wheel trim 3
Remove using hubcap tool 1 (located in
the tool kit) by engaging the hook in the
opening near the edge of the trim.
To refit, position the trim attachments
facing the wheel attachments and
press hard in the middle of the trim to
clip it to the wheel.
4
1
A
B
C
D
2
1
3
To Next Page
Loading...
