5.9
ENG_UD65243_1
Outils (XFK - Renault)
Storage position B in the tool
kit 1
Reposition the tools in the casing and
check that the assembly is correctly
positioned (not doing so may result in
noise).
Jack storage position A
Fold the jack away correctly before
storing it in its housing. Make sure that
the handle is placed correctly in its stor-
age position.
Do not leave the tools un-
secured inside the vehicle
as they may come loose
under braking. After use,
check that all the tools are correctly
clipped into the tool kit, then posi-
tion it correctly in its housing: risk of
injury.
If bolts are supplied with the emer-
gency spare wheel, you must use
these bolts only for the emergency
spare wheel.
The jack is designed for wheel
changing purposes only. Under no
circumstances should it be used for
carrying out repairs underneath the
vehicle or to gain access to the un-
derside of the vehicle.
TOOLS (2/2)
A
B
1
To Next Page
Loading...
