2.10
ENG_UD71447_2
Fonction Stop and Start (XFK - Renault)
STOP AND START FUNCTION (3/4)
Conditions preventing the
standby of the engine
Certain conditions prevent the system
from using the engine standby function,
including when:
– the driver’s door is not closed;
– the driver’s seat belt is not fastened
or was not fastened when driving
began;
– reverse gear is engaged;
– the bonnet is not locked;
– the outdoor temperature is too low or
too high;
– the battery is not sufficiently charged;
– the difference between the vehicle
interior temperature and the auto-
matic climate control instruction is
too high;
– parking distance control is in opera-
tion;
– the altitude is too high;
– the slope is too steep for vehicles
fitted with an automatic gearbox;
– the “Clear view” function is activated
➥ 3.9 ;
– the engine temperature is too low;
– the emission control system is being
regenerated;
– ...
Warning light
is displayed on the
instrument panel. This notifies you that
engine standby is not available.
The
warning light may appear
along with a message on the instru-
ment panel:
– “Optimising Battery Recharge” to pri-
oritise battery charging;
– “Prioritising Thermal Comfort” to pri-
oritise air conditioning;
– “Prioritising running engine” to priori-
tise engine operations.
Deactivate the Stop and
Start function for any opera-
tion performed in the engine
compartment.
To Next Page
Loading...
