2.99
ENG_UD72112_2
Limiteur de vitesse (XFK - Renault)
SPEED LIMITER (4/4)
Putting the function on
standby
The speed limiter function is suspended
when you press switch 5 (0). The limit
speed is stored and displayed in grey
on the instrument panel.
Recalling the limit speed
If a speed has been stored, it can be re-
called by pressing the 4 switch.
Switching off the function
The speed limiter function is inter-
rupted:
– when you press the 1 switch. In this
case, the speed is no longer stored;
– when you press the 2 switch. In this
case the cruise control is selected
and there is no stored speed.
The warning light 6 disappears from
the instrument panel to confirm that the
function is no longer active.
When the speed limiter is set to
standby, pressing the 3 switch
re-activates the function without
taking into account the memorised
speed: the speed at which the vehi-
cle is moving is taken into account.
2
1
3
4
5
6
6
To Next Page
Loading...
