1.35
ENG_UD71426_2
Sièges avant (XFK - Renault)
The label B on the seat base reminds
you of these instructions.
2
Estate version flat position
Depending on the vehicle, the seatback
on the passenger side may be folded
down onto the seat base to create a flat
position.
– Deactivate the front passenger
airbag ➥ 1.88 ;
– hold handle 4 and move the seat as
far back as possible;
– hold the top of the seatback to lower
it;
– pull the lever 2 and pull the seatback
down and forwards. While lowering,
tilt headrest 8 to position it under the
dashboard. The seat base positions
itself on the floor;
– make sure that there is nothing which
will prevent the seat from moving;
– the seat locks automatically. Check
that the bonnet is correctly locked.
Be sure to hold the seat-
back when placing it in the
flat position.
Risk of injury.
Maximum weight on the seat in the
flat position: 80 kg, with the weight
evenly distributed.
The label B on the seat base re-
minds you of these instructions.
4
2
B
FRONT SEATS (3/7)
8
To Next Page
Loading...
