1.37
ENG_UD71426_2
Sièges avant (XFK - Renault)
FRONT SEATS (5/7)
– press on the seat base to ensure
that it is correctly positioned on the
floor. There is a risk the seatback
being scratched if it is incorrectly po-
sitioned;
– remove the headrest 9 from the seat;
– store the headrest 9 in its housing
under the seat base;
– unlock the seatback by lifting
handle 10 again and position it hori-
zontally (movement E);
Van version flat position
The seatback on the passenger side
may be folded down onto the seat base
to create a flat position.
– Deactivate the front passenger
airbag ➥ 1.88 ;
– check that the floor is clear of any
objects;
– unlock the seat base by lifting the
handle 10 and move the seat for-
wards, onto the floor (movement D)
by taking it by the rear section C;
10
9
9
D
E
F
The label F on the side of the seat base
reminds you of these instructions.
Do not use the headrest
housing 9 to store any other
objects.
Risk of damage to the
seat wiring.
C
To Next Page
Loading...
