Renault Master Van 2004 - Page 148

BATTERY:
breakdown
(continued)
For vehicles fitted with bornier 1
Connect positive lead (+) A to
bornier 1, then to terminal (+) 2 of
the donor battery.
Connect negative lead (-) B to
terminal (—) 3 of the donor battery,
then to earth connection (-) 4.
Check that there is no contact
between leads A and B and that lead
A (+) is not touching any metal parts
on the vehicle supplying the
current.
Start the engine as normal. As soon
as it starts, disconnect leads A and B
in reverse order (4-3-2-1).