Renault Master Van 2004 - Page 17

DROPSIDE WITH SIDE PANELS (continued)
AOA NARA
Opening a side panel B
¢ The rear panel A is closed
Lower lever 5 completely. It is
essential to unfasten hook 6.
Lower lever 7 and side panel B
completely.
' ¢ The rear panel A is suspended
Lower lever 7 completely and
lower side panel B.
bc. Nilesh ca
Removing a side panel from its
_ hinges B
_ With the side panel on its side,
release hook 6 and slide the side
panel towards the rear.
Closing
a
sid
Proceed
i
openini
are
COrrei
Special note
The panels are designed so that a
tonneau cover with tensioning
devices can be attached.
The lower bars 8 cannot support a
person's weight.
Whenever loading, take care to
follow local laws regarding the
transport of objects, e.g.:
- draw attention to any object
which exceeds the length of the
bed;
- check that the vehicle's exterior
lights and number plate are still
visible;
- secure transported objects using
the lashing rings on the loading
bed, ete.