Renault Master Van 2004 - Parking Proximity Sensor

PARKING PROXIMITY SENSOR
Operating principle
Proximity sensors located in the
rear bumper “measure” the distance
between the vehicle and an obstacle
when reversing.
A beep sounds for less than one
second when reverse gear is
selected.
This measurement is indicated by
beeps which become more frequent
the closer you are to the vehicle,
until they me one continuous
beep when the obstacle is
approximately 25 centimetres from
e vehicle.
Operating faults
When the system detects a fault, a
beep sounds for 3 seconds as a
warning when reverse gear is
selected. Contact your RENAULT
Dealer.
This function is an
additional aid which
indicates the distance
between the vehicle and an
obstacle when reversing by means
of audible signals.
Under no circumstances should it
replace vigilance and respon-
sibility on the part of the driver
when reversing.
‘The driver should always pay
m to sudden occurrences
spent eras
2.17