Renault R-Link 2 Getting Started

3/7
Geing started with R-Link2
01 Creating an imprint of your R-Link 2 system
Wait for 1 minute and then take out the USB stick.
You have created an imprint of your R-Link 2 system.
Put the USB stick in correctly.
Get comfortably seled in your vehicle, start the
engine and switch on your R-Link 2.
The first thing to do is to make an imprint of your
R-Link 2 system on board your vehicle using a
USBstick.
The USB stick must be blank with a minimum
capacity of 8 gigabytes and in FAT32 format.
01
Creating an imprint of your R-Link 2 system

Renault R-Link 2 Specifications

General

Voice Recognition	Yes
Screen Size	7 or 8.7 inches
Resolution	800 x 480 pixels
Connectivity	Bluetooth, USB, AUX
Compatibility	Android, iOS
Radio	AM/FM
Touchscreen	Capacitive touchscreen
Speaker Output	4 x 20W
Compatible Models	Renault Clio, Megane, Kadjar, Koleos
Navigation	Built-in GPS navigation