3
4
NU692_7_G1-FRA.qxd 22/10/04 11:15 Page 1.55
J84 - MEGANE SCENIC - NU692-7
C:\Documentum\Checkout\NU692_7_T1-ENG.win 8/12/2004 16:55
-page67
1.55
TRIP COMPUTER AND WARNING SYSTEM (continued)
Trip mileage reset buttons 3and 4
To reset the trip mileage recorder,
select the trip mileage display, then
press key 3 or 4 until the recorder is
reset.
Journey parameter reset buttons
3 and 4
With one of the trip parameters
selected on the display, press button
3 or 4 until the display resets.
Interpreting some of the values
displayed after resetting
The values showing average fuel
consumption, range and average
speed will become more stable and
reliable the further you travel since
thelasttimetheresetkeywas
pressed.
For the first few miles after pressing
the reset key you may notice:
• That the range increases as you
travel.
This is normal; average fuel
consumption may decrease
when:
- the vehicle stops accelerating,
- the engine reaches its operating
temperature (engine cold when
reset key pressed),
- when you enter an urban area
after driving on the open road.
• That the average fuel
consumption increases when the
vehicle is stationary with the
engine idling.
This is normal since the computer
takes account of fuel used during
idling.
Automatic resetting of the
journey parameters
Resetting occurs automatically
when the maximum capacity of any
of the parameters is exceeded.
To Next Page
