Need help?Do you have a question about the Rendamax R600 EVO and is the answer not in the manual?
Covers boiler usage guidelines and European standards compliance.
Details responsibilities for installers and information handover to users.
Explains boiler data plate symbols and operational logic.
Identifies main components of the R600 EVO boiler.
Presents detailed technical parameters for different boiler models.
Provides energy efficiency data and auxiliary consumption details.
Shows physical dimensions and connection sizes for various models.
Lists standard delivery items and optional accessories.
Describes methods for safely transporting the boiler unit.
Step-by-step instructions for removing the boiler casing.
Safety alerts before installation and guidance on boiler positioning.
Explains hydraulic, gas, condensate, and electrical connections.
Details regulations and recommendations for flue gas system design.
Provides guidance on calculating flue gas system lengths and pressure classes.
Illustrates different configurations for ambient air and flue gas connections.
Outlines the steps for making the boiler's electrical connections.
Shows the internal electrical connections and terminal assignments.
Covers filling, pressure, and quality checks of the water system.
Describes standard and pumped systems for condensate neutralisation.
Details checks for gas supply, flue/air intake, and condensate drain.
Step-by-step guide for initial boiler operation and safety checks.
Instructions for checking and adjusting combustion settings.
Verifies gas valve settings and water flow rates through the boiler.
Procedures to verify the correct operation of all safety devices.
Covers gas leak checks and procedures for long-term boiler shutdown.
A template for recording commissioning results and parameters.
Identifies and explains the functions of the boiler's control panel buttons.
Details how to navigate the display and use programming functions.
Describes key operational modes and procedures like setpoint adjustment.
Lists essential maintenance tasks and how to replace ignition/ionisation electrodes.
Instructions for cleaning the condensate tray and refilling the syphon.
Procedures for cleaning the dirt collector and inspecting the combustion chamber.
Covers checks for water/gas parameters and safety device functionality.
A template for recording maintenance activities and findings.
Lists lockout error codes, their descriptions, and potential causes.
Provides resistance charts for 10kΩ and 1kΩ NTC temperature sensors.
Lists standards the product conforms to and CE marking details.
General| Category | Water Heater |
|---|---|
| Manufacturer | Rendamax |
| Model | R600 EVO |
| Voltage | 230 V |
| Maximum Water Pressure | 10 bar |
| Fuel Type | Natural Gas |
| Frequency | 50 Hz |
| Safety Features | Overheat protection |
To Next Page
