What to do if RENDER ALARMS Euro ONE Security System shows exit via hallway?
If your RENDER ALARMS Security System displays an exit via hallway message, it likely means a protected door on the exit route was left open. Return to the keypad, note the message, and stop the setting procedure using your PIN code or Tag. Close the open door, and then start the setting procedure again.
General| Brand | RENDER ALARMS |
|---|---|
| Model | Euro ONE |
| Category | Security System |
| Language | English |
Explains the display, numeric keypad, ABCD keys, and tag presentation area of the Euro alarm keypad.
Details the meaning of various LED indicators on the keypad and readers, signaling system status and faults.
Covers the use of proximity tags for system control and essential security checks before arming.
Step-by-step guide on how to arm the alarm system when leaving the premises, including exit tones.
Instructions for disarming the alarm system upon entering the premises using a PIN code or tag.
Explains how to use an external proximity reader to set or unset the alarm system and interpret LED feedback.
Guides on silencing an active alarm and displaying the reason for the alarm activation.
Explains how to use the keypad to summon personal assistance in an emergency and how to reset this feature.
Provides guidance on resolving issues during system setting, such as warning tones and fault LEDs.
Addresses problems that may occur when leaving the building, such as the exit tone not ceasing, and how to resolve them.
To Next Page