RenewAire EV Premium L

Need help?

Do you have a question about the RenewAire EV Premium L and is the answer not in the manual?

Summary

Unit Placement and Mounting

Mounting the Unit

Covers installation orientation, mounting on walls, and suspending from joists.

Required Service Clearances

AC Power Source Requirements

Details the 120 VAC power requirement and the need for a grounded outlet.

Load Bearing Capacity of Supports

Installation Procedures

Installation Materials and Tools

Electric Service Entry Guidelines

Low Voltage Service Entry

Attaching Ducts to the Unit

Selecting Airflow Settings

Guidance on determining and setting airflow volumes for Continuous and Boost modes.

Balancing Airflows

Procedures for setting fan speeds to achieve balanced or slightly imbalanced airflows.

Wiring Schematics

Low Voltage Wiring Diagrams

Operation and Commissioning

Manometer Readings for Commissioning

Airflow Readings and Conversions

Maintenance Procedures

Initial Maintenance After 30 Days

Recalibrating Airflows

Troubleshooting Common Issues

Indications of Potential Problems

Addressing Noise Issues

Diagnosing and resolving fan noise or vibration problems.

Troubleshooting No Airflow

Steps to diagnose and resolve issues when there is no apparent airflow.

Inadequate or Reduced Airflow

Methods to diagnose and fix problems with insufficient airflow.

Unit Fails to Run in Specific Speed Modes

Diagnosing failures in either low or high speed operation modes.

Resolving No Apparent Reason for Low Airflow

Final troubleshooting step involving resetting fan potentiometers.