Need help?Do you have a question about the Renfert Silent TS 2921-0050 and is the answer not in the manual?
Indicates a direct risk of injury.
Indicates a hazard due to electrical current.
Indicates hot surfaces or objects.
Disconnect the unit from mains power before opening.
Prepare the unit and select a suitable setup location. Ensure adequate ventilation.
Connect the suction hose to the unit and the extraction point. Avoid kinks.
Connect the unit to the wall outlet, ensuring voltage compatibility and proper grounding.
Connect dust-generating equipment to the unit's coupler socket for automatic operation.
Detail for connecting an external exhaust air route. Ensure adequate fresh air supply.
Identifies and explains the functions of the unit's various operating elements and controls.
Instructions for turning the dust extractor on and off using the designated switches.
How to adjust and view the suction performance levels using specific buttons and the display.
How to select and operate the unit in automatic mode, triggered by connected equipment.
Adjusts the sensitivity for the automatic start feature based on equipment current draw.
Explains the "Change Filter" indicator and its meaning.
Importance of inspecting and maintaining seals for proper dust extractor function.
Step-by-step guide to safely remove and replace the dust bag.
Detailed instructions for replacing the fine particle filter.
Procedures for replacing the exhaust filter.
Instructions for replacing the filter for the unit's electronics.
Information on device overload switches (fuses) and resetting them.
How to activate and interpret the unit's self-diagnosis feature and error codes.
Step-by-step guide for replacing the suction turbine unit.
Instructions for replacing the exhaust air labyrinth.
Troubleshooting for unexpected stops and E4 error indications.
Details errors detected during the self-test for the suction turbine.
Lists causes and solutions for low suction power.
Troubleshooting for the "Change Filter" indicator activating too soon.
Covers ruptures or other problems related to the dust bag.
Addresses issues with the automatic start/stop function and settings.
Solutions for panels that are difficult to open.
Defines the intended use and scope of the Silent TS dust extractor.
Presents crucial safety information, hazards, and precautions for operating the unit.
Specifies who is permitted to operate and service the unit.
Essential preparations before beginning operation.
Outlines who should perform repairs and general guidelines.
Instructions for the proper disposal of consumables and the unit.
General| Brand | Renfert |
|---|---|
| Model | Silent TS 2921-0050 |
| Category | Vacuum Cleaner |
| Language | English |
To Next Page