Renishaw NC4+ - Page 6

6
激光辐射
请勿直视激光光束
Laser safety and warning labels
Label B
Label A
Laser ‘On’ and probe status LED (for more information, see
the NC4+ Blue non‑contact tool setting system installation
and maintenance guide – Renishaw part no. H-6435-8501).
NOTE: Labels A and B are tted to
the transmitter unit only.
An adhesive warning label is
provided for attachment outside the
machine.
* Except for deviations pursuant to
Laser Notice No. 50 dated June 24 2007
Label A Label B
*