24
9. Mains Connection
Before plugging in the mains plug, ensure that the device voltage indicated at the subwoofer
corresponds to the available mains voltage. Do not connect the device if the indication does not
correspond to the available mains voltage. Wrong supply voltage will cause serious damage.
Be careful when handling mains cables and mains connections. Mains voltage may cause po
-
tentially fatal electric shock.
The mains outlet to which the subwoofer is connected must be easily accessible to quickly
separate the device from the mains voltage in case of an error.
The subwoofer and all connected devices must be switched o when the power supply is con
-
nected.
Make sure that no cables lie around openly. Install cables professionally to prevent accidents.
Make sure that all electrical connections and connection cables between the dierent devices
and any extension cables comply with the regulations and the operating instructions. If an ex-
tension line is used, ensure that it is designed for the respective load.
• Connect the mains cable inlet connector to the mains connection (10).
• Plug the mains plug into a wall socket.
• The POWER switch (9) is used to subwoofer the device on and o.
Position „O“: The device is o.
Position „I“: Device on.
The POWER ON (5) display lights up when the device is switched on.
To Next Page
Loading...
