Renkus-Heinz PF1-500 - User Manual

Instruction Manual
Installing
PF1-500 & PF1-500R Ampli ers
Into CFX Series Subwoofers
19201 Cook Street, Foothill Ranch, CA USA
Phone: +1 949 588 9997 • Fax: +1 949 588 9514
sales@renkus-heinz.com • www.renkus-heinz.com
RH 734 August 2011

Summary

Installing PF1-500 & PF1-500 R Amplifiers into CFX Series Subwoofers

Subwoofer Preparation and Connector Plate Removal

Remove screws holding connector plate and disconnect the white 2-pin connector from the plate.

PF1-500 Amplifier Configuration and Connection

Set the PF1-500 slide switch to 100 Hz Filter and connect the white 2-pin connector to the amplifier.

PF1-500 R Crossover Network Disconnection

Locate and disconnect the white 4-pin connector from the crossover network for PF1-500R installation.

Final Amplifier Installation and RHAON Control

Connect the amplifier, secure it, and understand RHAON control for subwoofer performance.

Renkus-Heinz PF1-500 Specifications