To Next PageTo Next Page
Need help?Do you have a question about the Renner Kompressoren RS 90/1-110 and is the answer not in the manual?
General information regarding this manual.
Details on the structure and how to use the manual.
Guidelines for correct and incorrect operation of the compressor.
Duties and obligations of the user when operating the machines.
Requirements regarding personnel responsibilities.
Explanation and meaning of safety symbols used in the manual.
Fundamental safety guidelines for safe compressor operation.
Procedures to follow in the event of an accident or emergency.
Definition of safe access points for operating and minor maintenance.
Overview of major compressor safety devices and their functions.
Detailed description of the compressor unit components.
Description of controls and indicators on the instrumentation panel.
Summary of control components for the optional frequency converter.
Instructions for the correct installation of the compressor.
Guidance on connecting the compressor to the compressed air and electrical systems.
Steps for safely starting the compressor for the first time.
Overview of the RENNERlogic instrumentation control.
Overview of the RENNERtronic instrumentation control.
Overview of the RENNERtronic plus instrumentation control.
Overview of the RENNERtronic TOUCH instrumentation control.
Overview of the RENNERtronic TOUCH Plus instrumentation control.
Explanation and essential points for normal compressor operation start-up.
Explanation on how to switch off the compressor in normal operation.
Advice on remedying malfunctions during normal operation.
Determination of dew point for optimum operating temperature.
General information to be heeded during servicing and maintenance work.
General points on troubleshooting and references to information sources.
Main points to consider when the unit needs to be vented.
Information on cleaning the compressor and the air filter.
Procedure for checking the oil level in the compressor.
Procedure for changing the oil filter.
Procedure for changing the compressor oil.
Procedure for cleaning the oil cooler.
Procedure for tensioning and/or changing the V-belt.
Instructions for decommissioning the compressor for extended periods.
Procedure to return the compressor to operation after storage.
Considerations for shutting down and disposing of the unit.
Electrical wiring diagrams for RENNER screw compressors.
General| Type | RS 90/1-110 |
|---|---|
| Max pressure | 10 bar |
| Voltage | 400 V |
| Frequency | 50 Hz |
| Compressor type | Piston |
| Category | Compressor |
