EasyManua.ls Logo

Renogy E.LUMEN - E.LUMEN Lighting Modes; Headlight Mode Details; White Floodlight Mode Details; Red Strobe Light Mode Details

Renogy E.LUMEN
6 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Lighting Modes
The E.LUMEN features 3 distinct lighting modes. Within each mode users can cycle
through the additional lighting features under the respective mode. You will also find
approximate run-times for each of the modes.
Charging
Charge the E.LUMEN using solar or by using the included USB to micro USB adaptor. It
will take approximately 30 hours to completely recharge the E.LUMEN (from 0%). If
charging through the USB to micro USB adaptor, it will take approximately 6 hours to
completely charge.
When charging through the USB port, the base by the port interface will turn red. Upon
complete charge, the red light will turn off.
USB Output
The E.LUMEN is compatible with most portable digital devices such as mobile phone,
MP3 / MP4, cameras, tablets, handheld game consoles, and conveniently charges them
while you are on the go.
When the USB output is being used, a blue light will appear by the port itself. The
E.LUMEN will turn off the blue light upon detecting that the battery is approaching low
capacity and cut off any USB activity to protect the battery. Functionality of the LED light
will remain active for approximately 30 minutes with the brightness reduced to 30% of the
normal luminance.
1. Headlight
Bright (3-4 Hours)
Dim (5-6 Hours)
Strobe (5-6 Hours)
Off
2. White Floodlight
Bright (3-4 Hours)
Dim (6-7 Hours)
Off
3. Red Strobe Light
Fast Strobe (6-7 Hours)
Slow Strobe (6-7 Hours)
Off

Other manuals for Renogy E.LUMEN