FlexiPanels
®
Basic HMI
© Renu Electronics Pvt. Ltd.
Page 7 of 20
Product Dimensions
This section of the manual provides dimensional details of FP2-V2 series products. All the dimensions
shown below are measured in mm.
FP2043-V2
FP2070-V2
Minimum Clearances
Maintain clearance from enclosure walls, wires, and other adjacent devices. Keep 2” space on all sides
for adequate ventilation. Plan for adequate space around the product and inside the enclosure for
ventilation and cabling. Take into consideration the heat produced by other devices in the enclosure. The
ambient temperature around this product must be 0° to 50°C.
To Next Page
Loading...