FlexiPanels
®
Advance HMI
Page 9 of 17
© Renu Electronics Pvt. Ltd.
CPU, Memory and Power Supply
Power Rating
ATTENTION: Logging to External memory
The Ethernet models of FP4 series supports SD card slot, which can be used to log
the data directly on SD card. MicroSD HC card with capacity between 4GB to 32GB
is supported. Supported speed classes are as follows:
While inserting or removing SD card, the device power must be turned off.
The user must take periodic backup of logged data to avoid loss of data.
CPU: 32-bit RISC processor
Up to 1GB that includes user
application, data log, alarms,
retentive memory and logic
memory
24VDC (±15%) with isolation
RTC:
Built-in, date and time function