Need help?Do you have a question about the Renu Electronics GWY-500 and is the answer not in the manual?
General| Brand | Renu Electronics |
|---|---|
| Model | GWY-500 |
| Category | Gateway |
| Language | English |
States manual is copyrighted by Renu Electronics Pvt. Ltd.; reproduction is prohibited.
Instructions for returning the unit for service, including packaging and shipping address.
Offers support contact info and details manual revision history.
Outlines warranty period for new/rectified products and voiding conditions.
Key points on product usage and warnings against modifications.
Explains the purpose of the user manual for safe installation, configuration, and operation.
Defines the Gateway as a protocol converter and data sharer between devices.
Details technical specifications: power, ports, baud rate, dimensions, weight, certifications.
Describes how to mount the GWY-500-B unit using DIN rail or back panel.
Details the pinouts and specifications for COM1 and COM2 communication ports.
Explains the status indications provided by the bicolor LEDs on the GWY-500 unit.
Overview of the PROFIBUS standard and its versions for industrial automation.
Explains the GWY-500's role as a communication bridge between serial and Profibus networks.
Covers the operational aspects and configuration of the GWY-500-B device.
Explains operational modes, repeat cycle, and control words for block execution.
Details communication settings, error indication, diagnostics, and status reporting.
Covers default registers, recipes, and IDB control word for data management.
Discusses the functionality of Gateway Profibus Slave driver and other serial drivers.
Guides on creating and testing a simple Gateway project for system requirements.
Details connecting Toshiba Inverters and Modicon PLCs as Profibus slaves.
Describes connecting SCADA software to the Profibus network via the GWY-500.
Lists PC/AT compatible computer specifications for the Gateway Setup software.
Provides step-by-step instructions for installing the Gateway Setup software from a CD.
Details setting up GWY-500-B with Omron Profibus master using Cx-Profibus.
Explains configuring GWY-500-B with Siemens Profibus master using Simatic Manager.
Illustrates various application scenarios for the GWY-500-B device.
Provides pinout details for various communication cables connecting to the GWY-500.
Shows the pinout for the IBM download cable used with the GWY-500.
To Next Page
