Renzetti 2000 Series User Manual

9 15
5
10
22
23
17
19
18
20
21
14
2
6
1
25
4
3
7
8
13
16
12
Note: This screw is for setting drag.
It is not intended to lock the shaft.
Do Not overtighten!
2,037,995
2,535,148
R
27
26
24
CLEAR NYLON
Center line
Cradle
Cradle Arm
Rotary Shaft
Cradle Support
Tension Screw
Cradle Arm Lock Screw
Cradle Support
Cradle Support Collar
Stem Lock
Screw
Pedestal Base
7/29/21
Your vise has been assembled and lubricated at the factory. All you have to do is attach
it to your existing traveler c-clamp or pedestal base as shown below. The jaws on your vise
have been black oxide coated and then oiled. After use they should be coated with oil
or rust inhibitor such as WD-40 to prevent rust or oxidation caused by acidity in your fingers.
Any light general purpose grease, preferably silicone grease, can be applied on any
moving part or o-ring*. Please note, our warranty does not cover rust damage.
We urge you to take time to familiarize yourself with the mechanics of
your traveler vise. Rotary tying can be easier and more productive.
See tips (opposite page). Please return your warranty card to validate
your warranty.
Vise Head Assembly
Note:
This product is covered under
U.S. Patents No.5,169,079 , No.4,169,562 , No 6,564,494132
MADE WITH PRIDE IN TITUSVILLE, FL
Note: Lubricate all parts and threads as needed
True Rotary
Model # C2003 Pedestal Model
Renzetti Traveler 2000 Series
252-40186
200-40272
200-40273
130-03024
290-40863
CLEAR NYLON
Stem Lock Screw
ITEM QTY. PART NUMBER DESCRIPTION
1 1 250-40006 7" Traveller Base Stem
2 1 290-40264 Cradle Arm Assly
3 1
4 1 290-40830 Cradle Support Collar Assly
5 1 130-03016 Lubricated O-Ring
6 1 110-00003 Cradle Arm Lock Screw
7 1 290-40826 Cradle Support
8 1 120-01147 Cradle Support Tension Screw
9 1 200-40271 Traveller Rotary Head
10
1
Rotary Shaft, Right Hand
11 Rotary Shaft, Left Hand
12 3 120-01658 Nylon Flat Washer
13 1 290-40835 Traveller Crank Arm
14 1 120-01450 Jaw Mounting Screw
15 1 110-00005 Rotary Tension Screw
16 1 110-00041 Collar
17 1 290-40336 Primary Jaw
18 1 290-40337 Secondary Jaw
19 2 Ball Bearing
20 1 130-03038 Jaw Spring
21 1 110-00042 Jaw Adjusting Screw
22 1 290-40313 Cam Arm
23 1 130-03017 Jaw O-ring
24 2 Tension Adjusting Knob
25 1 252-40158 Traveler Base Assembly
26 1 252-40180 Stem Support
27 1 120-01149 Pedestal Base Mounting Screw

Renzetti 2000 Series Specifications

General

Type	Fly Tying Vise
Series	2000
Color	Black
Material	Aluminum
Base Type	C-Clamp
Adjustability	360 degree rotation

Summary

Vise Head Assembly

Vise Components and Part Numbers

Lists and describes the individual parts and their corresponding numbers for the vise head assembly.

Jaw Operation and Adjustment

Hook Placement in Jaw

Instructions on correct hook placement within the vise jaws to prevent damage and ensure proper function.

Setting the Jaw Gap

Guide on adjusting the vise jaw gap for optimal hook fit and clamping security.

Jaw Adjustment Positions

Details on moving the vise jaws to accommodate different hook sizes and positions.

Rotary Tension Adjustment

Adjusting Rotary Tension

Steps to modify the drag against the vise's rotary motion for preferred tying control.

True Rotary Tying Tips

Tying Techniques

Advice and techniques for effective fly tying using the rotary vise's capabilities.