English English9 10
Install the Camera with Loop Strap
Thread the provided strap to the plate and fasten it to a tree. Next, attach the camera to the plate
and you are good to go.
NOTE: To adjust the camera angle later, please loosen the bracket by turning the upper part
anticlockwise.
Screw the camera to the bracket.
Adjust the camera angle to get the best eld of view.
Secure the bracket’s mounting plate to the base with screws.
3
Secure the camera by turning the
part on the bracket identied in
the chart clockwise.
4
To Next Page
Loading...
Need help?
General
