Need help?Do you have a question about the Reolink Argus 3 Pro and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| Luminous flux | 230 lm |
| Day/night mode | Yes |
| Color temperature | 6500 K |
| Placement supported | Outdoor |
| Connectivity technology | Wireless |
| Form factor | - |
| Mounting type | Ceiling/wall |
| Product color | White |
| LED indicators | Status |
| International Protection (IP) code | IP65 |
| Sensor type | CMOS |
| Optical sensor size | 1/3 \ |
| LED type | IR |
| Infra-red wavelength | 850 nm |
| Night vision distance | 10 m |
| Number of illumination LEDs | 6 |
| Total megapixels | 4 MP |
| Maximum resolution | 2560 x 1440 pixels |
| Video formats supported | H.265 |
| Number of cameras | 1 |
| Field of view (FOV) angle | 122 ° |
| Digital zoom | 16 x |
| Audio system | 2-way |
| Security algorithms | WPA-PSK, WPA2-PSK |
| Alert notification type | E-mail, Text alert message |
| Motion sensor technology | Passive infrared (PIR) sensor |
| Intelligent Video Surveillance (IVS) system features | Human detection |
| Ethernet LAN | No |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Power source type | Battery, USB |
| Compatible memory cards | MicroSD (TransFlash) |
| Maximum memory card size | 128 GB |
| Operating temperature (T-T) | -10 - 55 °C |
Weight and Dimensions| Depth | 121 mm |
|---|---|
| Width | 56 mm |
| Height | 90 mm |
| Weight | 330 g |
Covers unboxing, initial camera setup, and included accessories.
Guides on how to install and secure the rechargeable battery.
Explains methods for charging the camera's battery.
Step-by-step guide for configuring the camera via the Reolink App.
Instructions for physically mounting the camera in various locations.
How to access and use the real-time video feed from the camera.
Configures the PIR sensor for detecting motion events.
Manages push notifications and email alerts for motion detection.
Sets up email alerts with text or picture content upon motion detection.
Configures the camera's built-in siren for motion alerts.
Configures the camera to record motion events to an SD card.
Solutions for problems like power, connectivity, and scanning errors.
To Next Page
