Reolink Argus 3 Pro User Manual

Reolink Wireless Battery-powered Camera
51
Set up Motion Recording
When the camera detects a motion, it can record and save motion recordings to
SD card automatically. You need to install a SD card to the camera, refer to the part
of Install the Micro SD card in Chapter 7 about choose the correct SD card and
learn how to insert the SD card.
Set up Motion Recording
1.
Tap on . Then tap on Camera Recording, tap again to enable Camera
Recording.
2. Tap Schedule to set up a schedule when you want the camera to save motion
recordings, then tap Save. This is only applicable for Argus 3 Pro and you can also
choose the Detection Type: Person, Vehicle or Others.

Reolink Argus 3 Pro Specifications

General

Type	IP security camera
Luminous flux	230 lm
Day/night mode	Yes
Color temperature	6500 K
Placement supported	Outdoor
Connectivity technology	Wireless
Form factor	-
Mounting type	Ceiling/wall
Product color	White
LED indicators	Status
International Protection (IP) code	IP65
Sensor type	CMOS
Optical sensor size	1/3 \
LED type	IR
Infra-red wavelength	850 nm
Night vision distance	10 m
Number of illumination LEDs	6
Total megapixels	4 MP
Maximum resolution	2560 x 1440 pixels
Video formats supported	H.265
Number of cameras	1
Field of view (FOV) angle	122 °
Digital zoom	16 x
Audio system	2-way
Security algorithms	WPA-PSK, WPA2-PSK
Alert notification type	E-mail, Text alert message
Motion sensor technology	Passive infrared (PIR) sensor
Intelligent Video Surveillance (IVS) system features	Human detection
Ethernet LAN	No
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Power source type	Battery, USB
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	128 GB
Operating temperature (T-T)	-10 - 55 °C

Weight and Dimensions

Depth	121 mm
Width	56 mm
Height	90 mm
Weight	330 g