Reolink Argus 3 Pro User Manual

Reolink Wireless Battery-powered Camera
112
Q9: Can two cameras work with one solar panel?
A:No, one solar panel can only work with one solar panel.
Q10: How long the solar panel power extension cable can connect.
A:The cable length of Reolink solar panel is 4 meters. If it is not long enough in your
case, you may consider purchasing our solar panel extension cable (4.5 meters/15
feet). You can add up to 2 Solar Panel extension cables to the solar panel so that
the total distance can reach up to 13 meters (43 feet).
Q11: Can i grant a user account and limited the feature of user account.
A: No, the battery powered camera only have admin account, its unable to grant a
user account for this camera.
Troubleshootings
1. Camera Is Not Powering On
If your camera is not starting up, please try the following solutions:
·Make sure the power switch is turned on.
·Charge the battery with a DC 5V/2A power adapter. (When the green light is on,
the battery is fully charged.)
·If these don’t work, please contact Reolink Support https://support.reolink.com/.
2. Camera Failed to Scan QR Code on the Phone
If the camera cannot scan the QR code on your phone, please try the following
solutions:
·Remove the protective film from the camera lens.
·Wipe the camera lens with a dry paper/towel/tissue.
·Narrow the distance between your camera and the mobile phone so that the
camera can focus better.
·Make sure there is enough lighting.
·If these don’t work, please contact Reolink Support https://support.reolink.com/.
3. Camera Failed to Connect to Wi-Fi During Initial Setup Process
If the camera fails to connect to Wi-Fi, please try the following solutions:
·Make sure that you have entered the correct Wi-Fi password.
·Put the camera closer to your router to ensure strong Wi-Fi signals.
·Change the encryption method of the Wi-Fi network to WPA2-PSK/WPA-PSK
(safer encryption) on your router interface.
·Change your Wi-Fi SSID or password and make sure the SSID is within 31
characters and password is within 64 characters.
·Set your password using only the characters available on the keyboard.
·Make sure the Wi-Fi is on 2.4Ghz, as the battery-powered Wi-Fi cameras don’t
support the 5Ghz Wi-Fi.

Reolink Argus 3 Pro Specifications

General

Type	IP security camera
Luminous flux	230 lm
Day/night mode	Yes
Color temperature	6500 K
Placement supported	Outdoor
Connectivity technology	Wireless
Form factor	-
Mounting type	Ceiling/wall
Product color	White
LED indicators	Status
International Protection (IP) code	IP65
Sensor type	CMOS
Optical sensor size	1/3 \
LED type	IR
Infra-red wavelength	850 nm
Night vision distance	10 m
Number of illumination LEDs	6
Total megapixels	4 MP
Maximum resolution	2560 x 1440 pixels
Video formats supported	H.265
Number of cameras	1
Field of view (FOV) angle	122 °
Digital zoom	16 x
Audio system	2-way
Security algorithms	WPA-PSK, WPA2-PSK
Alert notification type	E-mail, Text alert message
Motion sensor technology	Passive infrared (PIR) sensor
Intelligent Video Surveillance (IVS) system features	Human detection
Ethernet LAN	No
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Power source type	Battery, USB
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	128 GB
Operating temperature (T-T)	-10 - 55 °C

Weight and Dimensions

Depth	121 mm
Width	56 mm
Height	90 mm
Weight	330 g