Reolink Argus 3 Pro User Manual

Reolink Wireless Battery-powered Camera
2
The screenshot used in this user manual is based on model Arugs 3 Pro. The menu and
options of your model may be different, please refer to the actual page of your own model.
1. Camera Introduction
Device Overview
Argus 2/Argus Pro
A Rechargeable battery and Wi-Fi connectivity make the camera totally wire-free.
No network or power cable, no drilling and no outlets needed. Security is simple.
You can put it anywhere you want: on a shelf or a table; at the front door or back
door; from room to room, to keep an eye on the elderly, babies or pets. Or use it at a
temporary construction site, rental house or holiday house.
1
Daylight Sensor
2
6 PCS IR LEDs
3
Lens
4
Status LED
5
Built-in Mic
6
Built-in PIR Motion Sensor
7
Speaker
8
Wall Mount
9
Rechargeable Battery
10
Micro SD Card Slot
11
Reset Hole

Reolink Argus 3 Pro Specifications

General

Type	IP security camera
Luminous flux	230 lm
Day/night mode	Yes
Color temperature	6500 K
Placement supported	Outdoor
Connectivity technology	Wireless
Form factor	-
Mounting type	Ceiling/wall
Product color	White
LED indicators	Status
International Protection (IP) code	IP65
Sensor type	CMOS
Optical sensor size	1/3 \
LED type	IR
Infra-red wavelength	850 nm
Night vision distance	10 m
Number of illumination LEDs	6
Total megapixels	4 MP
Maximum resolution	2560 x 1440 pixels
Video formats supported	H.265
Number of cameras	1
Field of view (FOV) angle	122 °
Digital zoom	16 x
Audio system	2-way
Security algorithms	WPA-PSK, WPA2-PSK
Alert notification type	E-mail, Text alert message
Motion sensor technology	Passive infrared (PIR) sensor
Intelligent Video Surveillance (IVS) system features	Human detection
Ethernet LAN	No
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Power source type	Battery, USB
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	128 GB
Operating temperature (T-T)	-10 - 55 °C

Weight and Dimensions

Depth	121 mm
Width	56 mm
Height	90 mm
Weight	330 g