!
To reduce false alarms, please note that:
• Do not install the camera facing any objects with bright lights, including sunshine,
bright lamp lights, etc.
• Do not place the camera too close to a place where there are frequently moving
vehicles. Based on our numerous tests, the recommended distance between the
camera and the vehicle is 15 meters (50ft).
• Stay away from the outlets, including the air conditioner vents, humidifier outlets,
the heat transfer vents of projectors, etc.
• Do not install the camera where there are strong winds.
• Do not install the camera facing the mirror.
• Keep the camera at least 1 meter away from any wireless devices, including Wi-Fi
routers and phones in order to avoid wireless interference.
NOTICE: When in rotating status, the camera will record motion detection videos
when the PIR sensor is triggered, but will not send any push or email notifications.
Important Notes for Reducing
False Alarms
When installing the camera, please install the
camera angularly (the angle between the sensor
and the detected object is larger than 10°) for
eective motion detection. If the moving object
approaches the PIR sensor vertically, the sensor
may not detect the motion events.
The ideal viewing distance is 2-10 meters
(7-33ft), which enables you to recognize a
human.
Entrance
θ
The path of the
moving object
Enatrance
FYI:
• The PIR sensor’s detecting distance: 26ft (in
default)
• The PIR sensor’s detecting angle: 90° (H)
• Camera Ideal Viewing
Distance
2-3 met
ers
10°
θ
Ide
al Viewing Distance:
2-10 met
ers (7-33ft)
• PIR Sensor Installation Angle
10English9 English
To Next Page
Loading...
Need help?
General
Weight and Dimensions
