Reolink E1 Outdoor PoE - Camera Setup and Installation; Smartphone Setup Guide; Wall Mounting Procedure

5 6
Set up the Camera
• On Smartphone
Scan to download the Reolink App.
Download and Launch the Reolink App or Client software, and follow the onscreen
instructions to nish initial setup.
NOTE: If you are connecting the camera to a Reolink PoE NVR, please set up the
camera via the NVR interface.
Install the Camera
Mount the Camera to the Wall
For outdoor use, the camera must be installed upside down for better waterproof performance.
Pull the button of the security mount and
unscrew the bracket to separate the two
parts.
Screw the bracket to the bottom of the camera.
1
2
3
“click”
“click”
open
close
1
2
3
“click”
“click”
open
close
1 2
English English
Devices
Cloud
You haven't added any device. Please click
the"+"button in the top right corner to add
Devices
Cloud
You haven't added any device. Please click
the"+"button in the top right corner to add