Reolink Floodlight PoE - Set up the Floodlight; Install the Floodlight

English English5 6
Set up the Floodlight
• On Smartphone
Scan to download the Reolink App.
Download and launch the Reolink App or Client software, and follow the onscreen instructions to
nishinitialsetup.
NOTE:
•WhensettinguptheWiFiFloodlight,youneedtofollowtheonscreeninstructionstonishtheWiFi
congurationrst.
• If you are connecting the PoE Floodlight to a Reolink PoE NVR, please set up the Floodlight via the
NVR interface.
Install the Floodlight
• Install the Floodlight 2-3 meters
(7-10 ft) above the ground. This
height maximizes the detection
range of the PIR motion sensor.
• For better motion detection
performance, please install the
oodlightangularly.
NOTE: If a moving object
approaches the PIR sensor
vertically,theoodlightmayfail
to detect motion.
Mounting Height:
2-3 Meters
PIR Detection Distance:
2-10 Meters
English English