Replay Audio Bluetooth User Manual

Bluetooth® User Manual
Know your headphone:
Bluetooth® On/Off Instructions:
1. Turn on: In the state of power off, press and hold the power button for 1s, the headset will send out two "dodo" prompt tones; hold it for 4s,
blue LED light will be on and flashing.
2. Turn off: In the state of power on, press the power key and hold it for 5s, until the red LED light is flashing three times. There will be three
"dodo" voices from loud to low.
Function Description
Wired headphone
This Bluetooth headphone can be as the wired headphone, just simply attached 3.5mm audio cable.
In the state of power off, it can be used as the wired stereo headphone by inserting the 3.5mm audio cable. Please
adjust the volume of sound sources when it is as the wired headphone. At this case, the volume control of the
headphone cannot be workable.

Replay Audio Bluetooth Specifications

General

Bluetooth Version	5.0
Charging Time	2 hours
Driver Size	40mm
Frequency Response	20Hz - 20kHz
Microphone	Yes
Foldable	Yes
Wireless Range	10 meters
Impedance	32 ohms

Summary

Bluetooth On/Off Instructions

Turning the Headset On

Press and hold the power button for 1s for two 'dodo' tones. Hold for 4s for blue flashing LED.

Turning the Headset Off

Press and hold the power button for 5s until red LED flashes three times and three 'dodo' tones.

Function Description

Using as a Wired Headphone

Connect with 3.5mm audio cable to use as a wired stereo headphone when powered off.

Connecting Your Bluetooth Headset

Prerequisites for Pairing

Ensure your phone/mobile device is Bluetooth® capable and the headset is charged and turned off.

Entering Pairing Mode

Press and hold the headset power button for 5s until the indicator light flashes alternating Red-Blue.

Pairing with Your Device

On your device, search for new devices, select 'Replay Audio', and enter passcode '0000' if prompted.