To Next PageTo Next Page
Need help?Do you have a question about the ReptiZoo THC16 and is the answer not in the manual?
Essential safety guidelines for operating the thermostat controller, including checks and usage restrictions.
An intelligent product for reptile and aquarium pet environmental control, based on expert experience.
Lists the items provided in the package with the thermostat controller.
Highlights the main functionalities and benefits of the device, such as integrated control and mode switching.
Identifies and explains the functions of each button on the control box panel.
Describes the controller's interface, including the LCD screen and its various readouts.
Illustrates the rear side of the control box, showing ports and buttons like sensor input and reset.
Details the connection ports and power ratings of the output box for connected devices.
Provides guidance on how to properly mount and connect the temperature sensor using the quick-plug system.
Outlines the essential technical specifications and operational ranges of the controller.
Details default settings and preset values for Tropical and Desert modes for temperature and timing.
Visual guide showing how the heating lamp and UV lamp are connected to the controller.
Step-by-step instructions for operating heating and UV lamps via the controller's temperature and timer functions.
Quick setup guide for Tropical and Desert modes using preset temperature values.
Detailed instructions for custom configuration of current time, day, and night start times.
Step-by-step guide to configuring distinct day and night temperature levels for optimal habitat conditions.
Instructions for programming four independent on/off time periods for connected devices.
Details the behavior and triggers for over-temperature and ultra-low temperature alarms.
Essential instructions for safe operation, handling, environmental conditions, and upkeep of the thermostat controller.
Addresses common problems like display issues, sensor errors, power connectivity, and factory reset procedures.
General| Sensor Type | External temperature and humidity sensor |
|---|---|
| Type | Temperature and Humidity Controller |
| Control | Temperature & Humidity |
| Temperature Range | 0°C to 50°C |
| Power Supply | AC 110V-240V 50/60Hz |
| Display | LCD |
| Weight | Approx. 200g |
