General Description
03
Notice
Do not use low temperature steam or high temperature disinfection
treatment.
Do not use electronic beam and other methods to sterilize.
Before use,the user must check whether the device has any apparent
impact on the patient’s safety (or instrument performance).
The recommended inspection cycle is once a month (or less).
If there is any obvious damage, replace the damaged part before use.
This instrument is precision electronic equipment, must be handled
carefully. The following measures are used to maintain the product
and prolong the service life of the instrument.
(1) Please timely recharge the battery when the battery power
display is insufficient.
(2) The battery should be charged as soon as possible after full
discharge. The device should be fully charged every 6 months
when not in use. The operation of the battery can prolong the life
of the battery.
(3) This instrument must be repaired by authorized qualified
engineers from manufacturer or distributor.
(4) The equipment should be kept in the box after cleaning and
disinfection for a long time, and placed in a non-corrosive gas and
ventilated room.
Maintenance
Part List
04
RESCOMF Ventilation Disinfector XD100 Device.
Euro/OS Charger
USB cable for charging
User Manual (with warranty card inside)
Important
To ensure the electrical charging specifications are followed please
use the approved Charger and USB cable.
XD100
Charger
USB cable
(Optional)
Working indicator
Charging indicator
On/Off button
Tubing port
Air inlet
USB charging port
Product Structure
To Next Page
Loading...