4. Log in to Server-Grade Decoder using the appropriate site username provided to you.
5. Newly installed decoders may need to be updated before use. Once logged-in, click the
user icon in the upper-right of the screen, then click “Update” (if available). The decoder will
update and restart. No other updates need to be performed on the unit until prompted.
6. Configure the decoder settings (on the Audio & Video tab under Settings):
○ Video Output
■ Output Device: Sets which card(s) the decoder will output to. If you are only
using one channel of video, it is best to output to only 1 card.
■ Video Format: Sets the video output format for the card(s). For best quality,
match the encoding format. For example, if an event was encoded at
720p59.94, setting the output format to 720p59.94 will result in the best quality.
○ Timezone: Set the timezone according to the local time of the decoder.
7. Select an event from the Events tab and start streaming!
For the most reliable playback experience possible, Resi recommends having at least 5
minutes of content buffered when streaming live events over the public internet, and 2
minutes when streaming in LAN-mode.
For detailed instructions on using Server-Grade Decoder, please visit our website documentation:
https://help.resi.io
Need help? E-mail us at support@resi.io, or call 800-875-0696, Option #2
To Previous Page
Loading...