Global leaders in sleep and respiratory medicine www.resmed.com
PRODUCT CODES
ResMed Power Station II
Europe and Rest of World RPS II Pack* 24921
Americas RPS II Pack** 24923
VPAP™ III and Stellar DC cable 24959
VPAP IV DC cable 24960
Stellar DC cable for use in Mobility bag 24981
S9™ Series DC cable 24961
Elisée™ DC cable 24962
VS III™ DC cable 24963
Europe and Rest of World battery only 24926
Americas battery only 24947
RPS II coupler kit 24964
Power Supply Unit adaptor 24946
USA Power Supply Unit 90W 36821
UK Power Supply Unit 90W 36822
EUR Power Supply Unit 90W 36823
ANZ Power Supply Unit 90W 36824
Manufacturer: ResMed Ltd 1 Elizabeth Macarthur Drive Bella Vista NSW 2053 Australia Distributed by: ResMed (UK) Ltd 96 Milton Park Abingdon Oxfordshire OX14 4RY UK. See www.resmed.com for
other ResMed locations worldwide. Elisée, S9, Stellar, VPAP and VS III are trademarks of ResMed Paris SAS and Elisée is registered in U.S. Patent and Trademark Office. Velcro is a trademark of Velcro Industries B.V.
Specifications may change without notice. © 2010 ResMed Paris SAS. 1014318/2 2011-05
TECHNICAL SPECIFICATIONS
Battery type
Lithium-ion
Recharge time
<4 hrs from fully empty to fully charged
Battery run time
For information on battery run time, see the
Battery/Device Compatibility List on
www.resmed.com
Dimensions (L x W x H)
230 x 126 x 26 mm (9.06 x 4.96 x 1.02 inches)
Battery weight
0.9 kg
Power supply
Input range 100–240V, 50–60Hz, 1.0-1.5A
Nominal for aircraft use 110V, 400Hz
Battery output voltage
(24V/26V) ± 0.5V, 90W continuous
Power supply unit output current (rated)
3.75A
Battery output current (rated)
3.75A/3.46A
* English, German, French, Italian, Spanish, Portuguese,
Dutch, Danish, Norwegian, Swedish, Finnish, Greek and
Chinese (simp and trad) User Guide
** English, French, Spanish and Portuguese User Guide
HOW IT WORKS
• ResMedPowerStationIIisanexternallong-life,lithium-ionbatterythatsimply
works alongside ResMed sleep therapy devices or ventilators.
• Charging the battery—quick and easy
You can charge the battery from 0% to greater than 95% in less than 4 hours.
• Power or backup power—simple and convenient
The voltage output selector on the RPS II rear panel lets you select the correct output voltage for
your device. Using the appropriate DC cable you can connect the battery to the ResMed therapy
device to provide power or backup power. When providing backup power (for AC or DC inputs), the
AC power cord connects the therapy device to the mains power outlet.
• Using two batteries—doubling capacity
The two batteries sit neatly on top of each other. A Velcro™ strap is included in the coupler
kit to hold them more securely if required. Both batteries can be charged together or used
simultaneously to power a therapy device (via the coupler)—one battery serving as the primary
power source, the other as the reserve.
Please refer to the ResMed Power Station II User Guide for detailed information on product handling and usage.
ORDERING INFORMATION
Step 1: Order the ResMed Power Station II Battery Pack specific to your region (includes one battery, one
carry bag, one power supply unit adapter and a User Guide).
Step 2: Order the DC cable based on the specific ResMed ventilator
or sleep device with which RPS II will be used.
Step 3: For devices other than S9, order the Power Supply Unit (PSU).
Optional: If two batteries are required, order an additional 'battery only' and a battery coupler.
Note: RPS II cannot be connected to mains power supply and the device simultaneously.
... or two batteries seamlessly connected to double the capacity.
RPS II: THE POWER OF ONE ... OR TWO
The convienience of one common battery across a range of devices ...
For more information about ResMed Power Station II and its compatibility with
ResMed ventilators and sleep devices, please visit www.resmed.com/RPSII
Information on the full suite of accessories can be found at
www.resmed.com/ventilationaccessories
To Previous Page
Loading...
Need help?
General