Need help?Do you have a question about the ResMed Power Station II and is the answer not in the manual?
General| Charge Time | Approximately 4 hours |
|---|---|
| Battery Type | Lithium Ion |
| Weight | 0.9 kg |
| Operating Temperature | 5°C to 35°C |
| Storage Temperature | -4°F to +140°F (-20°C to +60°C) |
| Expected Battery Life | Approximately 500 full discharge cycles |
| Output Voltage | 24V DC |
Specifies the intended purpose of the ResMed Power Station II.
Lists the main components included with the RPS II system.
Information on devices and accessories compatible with the RPS II.
Details the buttons, indicators, and ports on the RPS II control panel.
Instructions for charging the ResMed Power Station II battery.
Steps for connecting the RPS II to power a connected device.
How to configure the RPS II for backup power to a device.
Guidance on connecting and using two RPS II batteries.
Explanation of the LED indicators for battery status and charging.
Information on how humidifiers interact with the RPS II.
Guidelines for cleaning and maintaining the RPS II.
Guidelines for proper storage of the RPS II battery.
Information on battery service life and maintenance recommendations.
Advice for traveling with the RPS II battery.
Explanation of symbols used on the device or packaging.
Instructions for the proper disposal of the RPS II.
Important safety warnings and precautions for using the RPS II.
Replaces storage information, detailing charging and storage procedures.
To Next Page
